> ## Content Index
> Fetch the complete content index at: https://dashcampilot.com/llms.txt
> Use this file to discover other available public pages before exploring further.

# Dash Cam Parking Mode EV Hybrid: 3 Wiring Methods & Cutoffs
- URL: https://dashcampilot.com/dash-cam-parking-mode-ev-hybrid/
- Published: 2026-11-10T03:07:01.000Z
- Updated: 2026-11-10T03:07:01.000Z
- Author: DashCamPilot Admin
- Tags: Parking Mode, Dash Cam Features, Installation

Electric vehicles and hybrids carry massive high-voltage packs, yet their vital onboard computers rely on a surprisingly small 12-volt auxiliary battery. Running a dash cam in parking mode is completely viable on these platforms, but it introduces distinct electrical challenges that standard combustion vehicles never face.

Because an EV cannot idle an alternator to replenish accessory power while stationary, an unmonitored camera can rapidly deplete the 12V battery and prevent the vehicle from starting its high-voltage contactors.

The following sections outline safe wiring paths, dedicated backup power options, and precise voltage limits required to keep surveillance running without triggering system faults or draining your car.

📌

**Key Takeaway** 

Parking surveillance works on EVs and hybrids, but the sensitive 12V auxiliary battery requires strict protection. To prevent parasitic drain and system shutouts, use a dedicated LiFePO4 battery pack or set hardwired voltage cutoffs to at least 12.0V–12.2V alongside radar or motion-activated standby profiles.

⏱️

6 min read

📊

Intermediate

🎯

Updated 2026

![dash cam parking mode ev hybrid reference infographic](https://dashcampilot.com/content/images/2026/10/dash-cam-parking-mode-ev-hybrid-infographic.webp) 

Dash Cam Parking Mode Ev Hybrid reference infographic 

📤 Share 

[📌 Pinterest](https://pinterest.com/pin/create/button/?url=https%3A//dashcampilot.com/content/images/2026/10/dash-cam-parking-mode-ev-hybrid-infographic.webp&media=https%3A//dashcampilot.com/content/images/2026/10/dash-cam-parking-mode-ev-hybrid-infographic.webp&description=Dash%20Cam%20Parking%20Mode%20EV%20Hybrid%3A%203%20Wiring%20Methods%20%26%20Cutoffs&ref=dashcampilot.com) [📘 Facebook](https://www.facebook.com/sharer/sharer.php?u=https%3A//dashcampilot.com/content/images/2026/10/dash-cam-parking-mode-ev-hybrid-infographic.webp) [🐦 Twitter](https://twitter.com/intent/tweet?text=Dash%20Cam%20Parking%20Mode%20EV%20Hybrid%3A%203%20Wiring%20Methods%20%26%20Cutoffs&url=https%3A//dashcampilot.com/content/images/2026/10/dash-cam-parking-mode-ev-hybrid-infographic.webp&ref=dashcampilot.com) [💬 WhatsApp](https://api.whatsapp.com/send?text=Dash%20Cam%20Parking%20Mode%20EV%20Hybrid%3A%203%20Wiring%20Methods%20%26%20Cutoffs%20https%3A//dashcampilot.com/content/images/2026/10/dash-cam-parking-mode-ev-hybrid-infographic.webp&ref=dashcampilot.com) [✉️ Email](mailto:?subject=Dash%20Cam%20Parking%20Mode%20EV%20Hybrid%3A%203%20Wiring%20Methods%20%26%20Cutoffs&body=Check%20this%20out:%20https%3A//dashcampilot.com/content/images/2026/10/dash-cam-parking-mode-ev-hybrid-infographic.webp) 

[💾 Download ](https://dashcampilot.com/content/images/2026/10/dash-cam-parking-mode-ev-hybrid-infographic.webp) 

## How Dash Cam Parking Mode Works in EV and Hybrid Vehicles

### The Separation of Traction and Low-Voltage Systems

A common misconception among electric vehicle owners is that a 60 to 100 kWh traction battery serves as an endless buffer for 12V accessories. In reality, dash cam parking mode relies entirely on the vehicle's low-voltage auxiliary battery, rather than tapping into the massive high-capacity propulsion pack.

![dash cam parking mode ev hybrid works vehicles](https://masigo.net/cdn/shop/articles/Parking_mode_1800x.png?v=1683108215) 

📤 Share 

[📌 Pinterest](https://pinterest.com/pin/create/button/?url=https%3A//masigo.net/cdn/shop/articles/Parking%5Fmode%5F1800x.png%3Fv%3D1683108215&media=https%3A//masigo.net/cdn/shop/articles/Parking%5Fmode%5F1800x.png%3Fv%3D1683108215&description=dash%20cam%20parking%20mode%20ev%20hybrid%20works%20vehicles&ref=dashcampilot.com) [📘 Facebook](https://www.facebook.com/sharer/sharer.php?u=https%3A//masigo.net/cdn/shop/articles/Parking%5Fmode%5F1800x.png%3Fv%3D1683108215) [🐦 Twitter](https://twitter.com/intent/tweet?text=dash%20cam%20parking%20mode%20ev%20hybrid%20works%20vehicles&url=https%3A//masigo.net/cdn/shop/articles/Parking%5Fmode%5F1800x.png%3Fv%3D1683108215&ref=dashcampilot.com) [💬 WhatsApp](https://api.whatsapp.com/send?text=dash%20cam%20parking%20mode%20ev%20hybrid%20works%20vehicles%20https%3A//masigo.net/cdn/shop/articles/Parking%5Fmode%5F1800x.png%3Fv%3D1683108215&ref=dashcampilot.com) [✉️ Email](mailto:?subject=dash%20cam%20parking%20mode%20ev%20hybrid%20works%20vehicles&body=Check%20this%20out:%20https%3A//masigo.net/cdn/shop/articles/Parking%5Fmode%5F1800x.png%3Fv%3D1683108215) 

[💾 Download ](https://masigo.net/cdn/shop/articles/Parking%5Fmode%5F1800x.png?v=1683108215&ref=dashcampilot.com) 

Electric vehicles and hybrids use a conventional 12V auxiliary battery to power body control modules, telematics, and critical safety electronics. Most importantly, this auxiliary battery supplies the initial current required to close the primary contactors. If it dies, the vehicle cannot start even with a 100% full traction battery.

![dash cam parking mode ev hybrid separation traction](https://i.ytimg.com/vi/fcmumLKaw1o/maxresdefault.jpg) 

📤 Share 

[📌 Pinterest](https://pinterest.com/pin/create/button/?url=https%3A//i.ytimg.com/vi/fcmumLKaw1o/maxresdefault.jpg&media=https%3A//i.ytimg.com/vi/fcmumLKaw1o/maxresdefault.jpg&description=dash%20cam%20parking%20mode%20ev%20hybrid%20separation%20traction&ref=dashcampilot.com) [📘 Facebook](https://www.facebook.com/sharer/sharer.php?u=https%3A//i.ytimg.com/vi/fcmumLKaw1o/maxresdefault.jpg) [🐦 Twitter](https://twitter.com/intent/tweet?text=dash%20cam%20parking%20mode%20ev%20hybrid%20separation%20traction&url=https%3A//i.ytimg.com/vi/fcmumLKaw1o/maxresdefault.jpg&ref=dashcampilot.com) [💬 WhatsApp](https://api.whatsapp.com/send?text=dash%20cam%20parking%20mode%20ev%20hybrid%20separation%20traction%20https%3A//i.ytimg.com/vi/fcmumLKaw1o/maxresdefault.jpg&ref=dashcampilot.com) [✉️ Email](mailto:?subject=dash%20cam%20parking%20mode%20ev%20hybrid%20separation%20traction&body=Check%20this%20out:%20https%3A//i.ytimg.com/vi/fcmumLKaw1o/maxresdefault.jpg) 

[💾 Download ](https://i.ytimg.com/vi/fcmumLKaw1o/maxresdefault.jpg?ref=dashcampilot.com) 

For example, a Hyundai Ioniq 5 or Toyota Prius parked with a 100% traction battery can become completely immobilized if a dash cam runs continuously and drops the small 12V battery below contactor-closing voltage. Without sufficient low-voltage power, the car cannot switch into drive ready state.

### Why the DC-DC Converter Shuts Down While Parked

When an EV or hybrid is parked and locked, physical high-voltage contactors open automatically. This physical separation isolates the high-capacity traction pack to ensure electrical safety. Because of this air gap, the main traction battery does not continuously supply power to 12V accessories while the vehicle sits unattended.

Instead of an alternator, electrified vehicles use a solid-state DC-DC converter to step down high-pack voltage and charge the auxiliary system. However, the DC-DC converter only charges the auxiliary system while the vehicle is actively powered on or during brief, scheduled vehicle maintenance wakeups managed by the car's computer.

Because these maintenance wakeups are short and infrequent, they cannot sustain an ongoing electrical load. Consequently, an unmanaged dash cam operating in standard parking mode will steadily draw down the isolated 12V auxiliary battery on its own.

## The 12V Battery Risk: Why EV Auxiliary Systems Drain Faster

### Compact Auxiliary Battery Capacities (35 to 60 Ah)

Unlike internal combustion engine (ICE) vehicles that require substantial cold cranking amps to turn over an engine, electric and hybrid vehicles do not power a mechanical starter motor. Consequently, manufacturers fit them with compact 12V lead-acid or AGM auxiliary batteries, typically rated at just 35 to 60 Ah depending on vehicle size.

Because of this limited reserve capacity, continuous accessory loads deplete the battery rapidly. Drawing an auxiliary battery down repeatedly triggers permanent lead sulfation across the internal plates, irreversibly degrading cell capacity and accelerating premature battery failure.

### Parasitic Drain and the CAN-Bus Deep Sleep State

The operational danger extends beyond the dash cam's standalone consumption. Continuous low-voltage power draw can prevent vehicle computer networks (CAN-bus) from transitioning into their low-power deep sleep state, forcing sensitive gateway modules and sensor networks to stay active in the background.

This failure to sleep compounds parasitic current draw significantly. For example, a 45 Ah auxiliary battery can easily lose 15 Ah overnight from combined dash cam draw and an awake gateway module, leaving it unable to boot the car's primary electronic control units (ECUs).

⚠️ 

**Important Warning** 

A depleted 12V battery renders power door locks, electronic shifters, and critical high-voltage computer relays completely inoperable. If auxiliary voltage drops too low to close the high-voltage contactors, the vehicle cannot start or drive—even if the main traction battery is fully charged.

## Dash Cam Parking Mode EV Hybrid Power Options: 3 Wiring Methods

Selecting the right power connection for parking surveillance in an EV or hybrid depends on warranty sensitivities, DIY technical skill, and desired parking recording duration. Electrified platforms support three distinct wiring approaches.

### Method 1: Interior Fuse Box Hardwire Kit

Traditional hardwiring delivers a concealed, permanent installation. Installers use fuse taps to tap into existing low-voltage circuits (switched and unswitched) to supply power safely, allowing the camera to detect when the vehicle transitions from driving to parked.

While clean, this route requires accessing the cabin fuse junction box with a multimeter. Routing an add-a-fuse harness into the fuse panel can take an hour or more, requiring careful circuit selection to avoid sensitive control modules.

### Method 2: OBD-II Diagnostic Port Power Cable

OBD-II power adapters provide constant and switched power access without splicing or tapping fuse blocks. Most adapters feature an integrated voltage cutoff slider to manage power delivery directly at the port.

This approach dramatically reduces setup effort. For example, a 15-minute OBD-II plug installation on a Kia EV6 bypasses the complexities of routing an add-a-fuse harness into the interior cabin fuse junction box. Note that some vehicle models keep OBD power live constantly, which requires a cable with an integrated detection switch.

### Method 3: Standalone Auxiliary Battery Systems

Dedicated dash cam battery packs run the surveillance system entirely off-grid from the vehicle's electrical system while parked. These high-output packs draw power to recharge only while the EV or hybrid is actively powered on and driving.

Because the vehicle's native electrical system is completely bypassed during parking surveillance, this method supports multi-day recording intervals without drawing down the vehicle's 12V accessory supply.

### Wiring Method Comparison

⚡ **Direct Vehicle Wiring** 

Fuse kits and OBD cables provide low-cost, integrated power using the vehicle's onboard circuits for short-to-medium parking sessions.

🔋 **Isolated Battery Power** 

Dedicated packs safeguard factory warranties and support extended surveillance by running completely off-grid when parked.

## Dedicated LiFePO4 Dash Cam Battery Packs: Technical Insights

### How Electrical Isolation Eliminates 12V Battery Wear

Dedicated LiFePO4 dash cam battery packs eliminate auxiliary battery drain by only drawing charge when the vehicle is running or in accessory mode. These units charge rapidly in 40 to 60 minutes while the EV or hybrid actively operates its DC-DC converter during routine driving.

Once the vehicle powers down, an internal solid-state relay isolates the vehicle's 12V battery and powers the dash cam independently. This complete physical decoupling ensures zero parasitic draw on the car's factory electronics during surveillance periods.

LiFePO4 chemistry provides high thermal stability and thousands of charge cycles, suitable for cabin temperatures. Unlike standard lithium-ion cells, iron phosphate chemistry resists thermal runaway and endures cabin heat spikes above 140°F (60°C) without losing capacity.

💡 

**Did You Know?** 

A 96 Wh LiFePO4 pack under the passenger seat providing 32 hours of dual-channel buffered parking recording while drawing zero milliamps from the car's 12V battery.

### Capacity Ratings and Realistic Parking Mode Run Times

Standard LiFePO4 Dedicated Pack Capacity ranges from 38 to 128 Wh, with capacity scaling based on the specific battery pack model and expansion modules connected in sequence.

Across these sizes, Dedicated Pack Parking Runtime delivers 12 to 45 hours of multi-channel surveillance. Exact operational duration varies by camera power consumption and single vs dual channel setup, offering predictable standby time without risking vehicle computer shutdowns.

## Voltage Cutoff Details for Dash Cam Parking Mode in EV and Hybrid Cars

### Calibrating Cutoff Switches: 12.0V vs 12.4V Thresholds

Standard internal combustion engine (ICE) cutoff settings between 11.8V and 12.0V are dangerously low for electric and hybrid vehicles. Auxiliary batteries in electrified powertrains power computers rather than starter motors. Dropping to 11.8V destabilizes low-voltage onboard networks, causes ECU communication failures, and prevents vehicle high-voltage contactor relays from closing properly.

The Low Voltage Cut-Off Threshold (12V Lead-Acid) typically offers 12.0 to 12.4 V settings, which varies by user configuration on the hardwire kit. In hybrid and EV platforms, hardware low-voltage cutoffs must be set higher than in ICE cars—strictly to 12.2V or 12.4V. This preserves sufficient electrical buffer to avoid triggering vehicle fault codes and system shutdown errors.

### Handling Modern 16V Low-Voltage Vehicle Architectures

Engineering challenges multiply with newer production platforms transitioning away from lead-acid chemistries. Newer production vehicles use nominal \~16V lithium-ion auxiliary systems. For example, a 2023 Tesla Model Y runs a 15.6V nominal lithium-ion low-voltage battery. Connecting standard 12V-rated dash cam hardware to newer EVs utilizing these \~16V architectures can instantly destroy the equipment.

Modern hardwire kits must support auto-sensing wide voltage ranges (11.8V to 30V) to function safely across traditional and modern EV platforms. Utilizing a certified 12V-24V wide-input cutoff box or dedicated auxiliary battery pack ensures the dash cam operates on high-voltage nominal systems without overheating regulators or disrupting vehicle sleep states.

## Dash Cam Parking Mode EV Hybrid vs ICE and OEM Sentry Systems

Traditional internal combustion engine (ICE) vehicles rely on high Cold Cranking Amps (CCA) lead-acid batteries. These batteries are designed for short, massive power bursts to crank an engine and recharge only while the alternator spins.

In contrast, electric vehicles (EVs) and hybrids maintain their auxiliary 12V systems using steady DC-DC step-down converters tied to the high-voltage traction pack, fundamentally altering continuous parking load management.

Factory-integrated surveillance, such as Tesla Sentry Mode, keeps high-power autonomous driving computers, radar units, and vehicle vision pipelines continuously energized. This architecture consumes 1 to 3 kWh per day, draining roughly 7 to 12 miles of driving range every 24 hours.

By comparison, an aftermarket dash cam parking mode consumes under 0.08 kWh (80 Wh) in a 24-hour period. Because aftermarket cameras bypass vehicle-level processing, they provide persistent surveillance without phantom range loss from the high-voltage traction battery.

__Surveillance Power Demand and Architecture Comparison__
| Metric / Feature            | OEM Sentry System                      | Aftermarket Dash Cam           |
| --------------------------- | -------------------------------------- | ------------------------------ |
| Daily Energy Use (24 Hours) | 2,000 – 3,000 Wh (2–3 kWh)             | < 80 Wh (< 0.08 kWh)           |
| Active Computing Hardware   | Autonomous driving SoC & vehicle ECUs  | Low-power dedicated camera SoC |
| Traction Range Degradation  | 7 – 12 miles / day                     | 0 miles (negligible draw)      |
| Power Replenishment Path    | High-voltage battery contactors active | Verify for exact configuration |

### How to Read This Surveillance Comparison

This table compares system-level electrical overhead between factory integrated sentry modes and dedicated aftermarket dash cams. Energy figures are expressed in watt-hours (Wh) and kilowatt-hours (kWh) over a continuous 24-hour parking cycle.

Range impact estimates reflect standard passenger EV efficiency benchmarks (approximately 3 to 4 miles per kWh). OEM figures represent active surveillance states where high-voltage vehicle contactors remain engaged.

Exact power draw for aftermarket hardware fluctuates based on the selected surveillance profile—such as ultra-low-power radar standby versus continuous buffered time-lapse recording. Verify for exact configuration depending on whether your aftermarket hardware connects to the vehicle 12V system or an isolated auxiliary pack.

## Camera Surveillance Settings: Optimizing Radar and Motion Info

### Buffered Motion vs. Time-Lapse Mode Power Draw

Dash cam parking mode current draw typically ranges between 100 to 350 mA. This energy consumption varies by detection mode (radar, time-lapse, impact-only, or buffered motion) based on how much visual processing the onboard chipset performs while parked.

Continuous buffered recording keeps image sensors, internal buffers, and processors fully awake to save pre-incident footage. This configuration draws the highest continuous current. Using continuous unbuffered recording modes instead of radar, time-lapse, or impact-only detection unnecessarily exhausts power reserves.

Time-lapse recording balances continuous frame capture at 1-2 fps with reduced processor processing overhead. By omitting audio encoding and dropping high frame rates, the camera documents nearby events while keeping system power usage stable and predictable.

### Radar Detection and G-Sensor Sleep Modes

Radar and ultra-low-power impact-only detection modes reduce standby power consumption down to minimal levels (10-50 mA). The processor stays in an ultra-low-power sleep state, waking only when an external radar module senses approaching mass or the internal G-sensor registers physical shock.

This drop in standby consumption dramatically extends runtime. For example, switching from dual-channel continuous buffered recording (320 mA) to radar standby mode (15 mA) can extend parking surveillance from 14 hours to over 5 days on an identical energy reserve.

## Installation Guide: Critical EV and Hybrid Dash Cam Wiring Mistakes

Hardwiring a dash cam into an electric or hybrid vehicle requires strict attention to high-voltage electronics and sensitive control modules. Misplaced connections can disrupt vehicle communications, trigger fault codes, or damage auxiliary power systems. 

Under consumer protection laws such as the Magnuson-Moss Warranty Act, hardwiring non-invasive accessories into user-accessible fuse junction boxes does not void new vehicle manufacturer warranties unless the installation causes direct damage to factory components. 

### Safe vs. Prohibited Fuse Box Taps

Never tap into mission-critical safety circuits such as airbags (SRS), regenerative braking modules, anti-lock braking systems (ABS), or the Battery Management System (BMS) controller. Tapping these safety circuits instead of non-critical switched accessories can trigger dashboard warning lights and error codes. 

Safe installation requires using low-risk slots, such as the 12V rear accessory socket or multimedia display fuse slot. Always identify truly switched accessory fuses using a digital multimeter; EV auxiliary systems often keep accessory circuits energized for 10 to 30 minutes post-shutdown before entering deep sleep. 

Additionally, protect your 12V system by configuring hardwire kits correctly. Setting the low-voltage cutoff too low (below 12.0V) can permanently degrade small AGM or lead-acid auxiliary batteries found in EVs and hybrids. 

### Selecting Chassis Ground Points on Composite and Aluminum Bodies

Many modern EVs and hybrids use aluminum stampings or composite body panels to reduce weight. Improper grounding directly to structural aluminum body panels can lead to galvanic corrosion or ground loop faults that introduce electrical noise into sensitive sensors. 

Always terminate your dash cam ground wire onto dedicated factory steel chassis ground points or an unpainted factory grounding bolt clearly bonded to the primary unibody structure. 

## 📋Step-by-Step Guide 

1

**Select and Test Switched Fuses** 

Use a digital multimeter to confirm your chosen fuse, such as the 12V socket, drops to 0V once the vehicle completely sleeps.

2

**Avoid Safety and Management Circuits** 

Inspect the fuse panel diagram to verify you bypass all slots designated for SRS airbags, BMS modules, and ABS controllers.

3

**Attach Ground to Factory Steel** 

Crimp the ground wire eyelet securely to an unpainted factory steel chassis bolt to eliminate galvanic corrosion risks.

🔑 

**Key Takeaways** 

- ✓ EV and hybrid 12V auxiliary batteries have lower amp-hour capacity than ICE starter batteries, making them vulnerable to rapid parasitic depletion.
- ✓ High-voltage traction batteries disconnect from auxiliary DC-to-DC converters during vehicle sleep states, leaving 12V systems uncharged while parked.
- ✓ Three distinct wiring options exist: direct fuse panel hardwiring, plug-and-play OBD-II power cables, and dedicated external LiFePO4 battery packs.
- ✓ Dedicated LiFePO4 battery packs isolate the vehicle's electrical architecture entirely, eliminating low-voltage warning messages and warranty disputes.
- ✓ Surveillance motion and radar settings must be tuned to minimize standby current draw, preventing unnecessary camera wake-up cycles.

💡 

**Pro Tips** 

- 1 Select a conservative 12.4V cutoff threshold if hardwiring directly to an EV 12V lead-acid auxiliary battery to avoid sleep-cycle interruptions.
- 2 Avoid tapping safety-critical fuses like BMS, airbags, or braking modules; use accessory-switched circuits such as rear 12V sockets or USB ports.
- 3 Invest in a radar-based dash cam sensor to reduce continuous standby power consumption from 300mA down to under 15mA in parking mode.
- 4 Common mistake: Assuming an EV's large 80kWh traction battery automatically shields the sensitive 12V auxiliary battery from being drained flat.
- 5 Review manufacturer telematics information to ensure external parasitic draws do not prevent your hybrid or EV from entering low-power sleep states.

## ❓ Frequently Asked Questions 

### 1How does dash cam parking mode work on electric and hybrid vehicles? 

Parking mode operates by drawing continuous low-amperage power to monitor sensors while the vehicle is parked. In EVs and hybrids, this current comes from the auxiliary 12V lead-acid or lithium battery, not the primary traction battery pack. When motion, impact, or radar triggers the sensor, video footage is recorded instantly.

### 2Why do EV 12V auxiliary batteries drain quickly in parking mode? 

EV auxiliary batteries are smaller than traditional car starter batteries because they do not crank an engine. Crucial technical facts reveal that high-voltage DC-to-DC converters disconnect during deep sleep mode. Without constant charging, accessory parasitic draw depletes the smaller 12V capacity rapidly, triggering vehicle computer lockouts and dashboard error codes.

### 3What is the best wiring option for EV and hybrid parking mode? 

Installing a dedicated LiFePO4 dash cam expansion battery pack is the safest method. It isolates surveillance power consumption entirely from your vehicle's sensitive electrical systems. Alternatively, using switched OBD-II cables with preset voltage cutoff details provides safe surveillance without tapping fuse boxes or voiding manufacturer electrical warranties.

### 4What voltage cutoff settings should you configure for EV parking mode? 

Set hardwired voltage cutoffs to at least 12.2V or 12.4V for standard 12V auxiliary systems to safeguard critical vehicle startup electronics. Detailed cutoff info confirms that setting thresholds below 12.0V risks bricking EV computers, stranding the car, and accelerating permanent lead-acid battery degradation through deep discharge cycles.

### 5How does an aftermarket dash cam compare to OEM sentry systems? 

While OEM systems like Tesla Sentry utilize built-in exterior cameras, valuable insights show they keep the main drive computers awake, draining 5 to 10 miles of driving range daily. Aftermarket dash cams with radar detection use a fraction of that energy, offering reliable surveillance information without depleting high-voltage range.

### 6Will dash cam parking mode drain my EV or hybrid 12V battery? 

Yes. When parked, high-voltage contactors open, leaving low-voltage accessories to draw exclusively from the small 35-60 Ah 12V auxiliary battery. Without a properly configured low-voltage cutoff or an external battery pack, the camera can drain the 12V battery within 12 to 24 hours.